ATTACH THE INCLINE TUBE (
F
) TO THE BODY USING THE M12 x 75MM BOLT (
K
), M12 WASHERS
(
N
), AND THE M12 LOCKNUT (
M
). NOTE* (BACKREST SHOULD RAISE AND LOWER FREELY.
OVER TIGHTENING MAY CAUSE BINDING.) NOW INSTALL THE KNOB (
I
) INTO THE INCLINE
TUBE ON THE BODY AND INSERT THE SQUARE CAPS (
H
).
FRAME ASSEMBLY
M
N
K
B
I
H
H
C
NOTE: THIS BENCH FEATURES A CAM LOCK SYSTEM FOR THE BACKREST THAT
LOCKS IT INTO PLACE WHEN IN THE FLAT POSITION.
