WEIGHT STACK ASSEMBLY
INSTALL THE RUBBER DOUGHNUTS (
L
) ONTO THE BOTTOM OF THE CHROME RODS (
C
) ,
LEAVING APPROXIMATELY 2” PROTRUDING. INSERT THE CHROME RODS INTO THE TWO
OUTER HOLES IN THE BOTTOM SUPPORT.
ASSEMBLE THE WEIGHT STACK (
E
) BY SLIDING EACH PLATE OVER THE CHROME RODS (
C
)
AND ON TO THE BOTTOM SUPPORT.
SLIDE THE SELECTOR ROD/TOP PLATE ASSEMBLY (
D
) OVER THE CHROME RODS (
C
) AND
THROUGH THE WEIGHT STACK (
E
). INSERT THE WEIGHT STACK ADJUSTMENT PIN (
K
) INTO
THE WEIGHT STACK (
E
).
D
E
K
C
L
