-21-
2)
Before changing the battery, set the selector switch
to “
OFF
”
position.
Open the cover of the battery cabinet by a screwdriver.
3)
Replace the old battery with the same type battery.
4)
Close the battery cabinet cover and fasten the screw.
Caution:
Dispose the used batteries according to the rules, which
are defined by each community.
5. MAINTENANCE
1)
Before open the battery door, disconnect both test lead and
never uses the meter before the battery door is closed.
2)
To avoid contamination or static damage, do not touch the
circuit board without proper static protection.
3)
If the meter is not going to be used for a long time, take out
the battery and do not store the meter in high temperature or high
humidity environment.
4)
When take current measurement, keep the cable at the
center of the clamp will get more accurate test result.
5)
Repairs or servicing not covered in this manual should only
by qualified personal.
Periodically wipe the case with a dry cloth and detergent. Do not
use abrasives or solvents on the meter.
6)
Please take out the battery when not using for a long time.
