-2-
1.1 Do not operate the meter if the body of meter or the test lead
look broken.
1.2 Check the main function dial and make sure it is at the correct
position before each measurement.
1.3 Do not perform resistance, capacitance, temperature, diode
and continuity test on a live power system.
1.4 Do not apply voltage between the test terminals and test
terminal to ground that exceed the maximum limit record in this
manual.
1.5 Exercise extreme caution when measuring live system with
voltage greater than 60V DC or 30V AC.
1.6 Keep the fingers after the protection ring when measuring
through the clamp.
1.7 Change the battery
when the “
” symbol appears to avoid
incorrect data.
1.8 Use the DMM indoor, altitude up to 2000m and temperature
5
°C to 40°C.
Maximum relative humidity 80% for temperatures up to
31
°C, decreasing linearly to 50% relative humidity at 40°C.
1.9
In locations subject to radio frequency interference, the product
may malfunction and it resets automatically when leaving this
environment.
Meter Description
■
Terminals
