Installation illustration
There are two packing ways for this chair: one is backrest folding packing, the other
is backrest flat packing, for backrest folding packing, the two armrests are attached
as parts of the chair; for backrest flat packing, the two armrests have already been
installed onto the chair.
Step 1
Take the chair, left and right armrest
out of packing carton by two or more
people. No attached armrests if the
chair has already been installed
armrests.
Step 2
Raise the backrest backward until about
110
, the backrest is fixed in a correct
position with a crash sound.
Connect the air pipe on the armrest body to the pipe mouth on armrest cover, assembly the armrest
air pipe
pipe mouth
M6*15screw
twist cross screwdriver
clockwise
Installation illustration
Step 4
Connect the back pad, head pad
with the chair back.
Connect the head
pad and backrest
with velcro
Connect the
pad and
with a
back
backrest
zipper
head pad
back pad
backrest
Step 5
Install the control bracket to the right armrest with three screws, put the control into
the control holder.
Control
Twist cross
screwdriver clockwise
screw
*
the control holder
can be moved freely
on the bracket
Step 6
After completing installation, turn on the power, open switch on the out side of right armrest,
choose your favorite function to enjoy gentle and comfortable massage.
onto the blowing parts of the armrest body, be sure to fully insert the air pipe into the square hose of
blowing parts in case the air pipe is broken .push it forward and screw it on.
(same installation method for left and right armrest).
Step 3