9)
Never handle Valves that have been used on harmful substances unless they have been completely
decontaminated and certified safe to handle.
10)
If the processes or environments that the products are used in are likely to cause temperature (high or
low) that may cause injury to person if touched, then adequate insulation / protection must be fitted. It is
recommended that the insulation allows easy access for maintenance, to the sealant fittings , and to the Valve
operator.
11)
Valve must be protected from earthquake loading, traffic & wind.
12)
No Modification / Conversions are allowed without written authorization from Dembla Valves Ltd.
5.0 Unpacking :
For Carton
.
Keep Carton in position (Carton ‘up side’ should not be ‘down’).
.
Cut plastic strip properly which is tied around Carton & remove it. (White in color).
.
Cut cello tape properly which is stuck on Carton opening.
.
Open Carton properly.
.
Remove foam properly along with polythene wrapping.
.
Lift the valve properly & keep on clean & dry place
For Wooden Box:
.
Keep Wooden Box in Position (’upside’ of Wooden Box should not ‘down’).
.
Cut iron strip properly which is tied around Wooden Box & remove it.
.
Remove nail properly from top cover with proper equipment.
.
Loosen and remove Valve fixing nut (from inside of Box).
.
Lift the valve properly as shown in figure 1.
!
Warning
3
