Demco Excalibar 3, Operator'S Manual

Page 4

TB20061

Safety Sign Care

•  Keep safety signs clean and legible at all times.

•  Replace safety signs that are missing or have become illegible.

•  Replacement parts that displayed a safety sign should also display current sign.

•  Safety signs are available from your distributor, dealer parts department,  or factory.

How to install safety signs:

•  Be sure installation surface is clean and dry.

•  Decide on exact position before you remove backing paper.

•  Remove smallest portion of split backing paper.

•  Align decal over specified area and carefully press small portion with exposed sticky backing in place.

•  Slowly peel back remaining paper and carefully smooth remaining portion of decal into place.

•  Small air pockets can be pierced with a pin and smoothed out using piece of decal backing paper.

•   Carefully study and understand this manual.

•  Give tow bar a visual inspection for any loose bolts, worn parts, or cracked welds, and make necessary repairs. Follow mainte-

nance safety instructions included in this manual.

•  Be sure there are no tools lying on tow bar, towing unit or towed vehicle. 

•  Do not use tow bar until you are sure that area is clear, especially around children and animals.

•  Don’t hurry learning process or take tow bar for granted. Ease into it and become familiar with your new tow unit.

•  Practice operation of your tow unit and its attachments. Completely familiarize yourself and other operators with its operation 

before using.

•  Securely attach to towing unit. Use an appropriately sized and rated hitch ball and/or a class III, class IV receiver and attach 

safety cables.

•  Criss cross safety cables under tow bar, secure to mounting loops on towing vehicle.

•  Do not allow anyone to stand between vehicles when backing up.

•  Make sure tow rating on towing unit is high enough for what it is towing.

•  To prevent swaying of towed vehicle insure all tires are inflated to specifications. Failure to inflate tires evenly will result in 

towed vehicle to pull unevenly.

Before operation

SAFETY Sign Locations

Types of safety sign and locations on the Excalibar 3 are shown in illustration below. Good safety requires that you fa-

miliarize yourself with various safety signs, type of  warning, and  particular function related to that area, that requires 

your SAFETY AWARENESS.

WARNING

CAUTION

Safety Information