Figure 3
Figure 1
Figure 4
Stainless Chair.
With Reclining Backrest
Stainless Chair.
With Tilt N Space
Figure 1 Shows the chair in the
fully upright position.
Figure 2. To lower the backrest,
pull up on the cable located in the rear
of the chair until the locking mecha-
nism is released. At the same time,
lean the backrest slightly forward, then
gently lower the backrest to the desired
position. To raise the backrest, pull up
on the backrest cable until the locking
mechanism is released, then raise the
backrest to the desired position. Re-
lease the cable when that position has
been reached.
Be sure the chair is in a stationary
position with the brakes locked
.
Figure 3. Shows the chair in the fully
reclined position with the arm rests
removed
Figure 4. To tilt the chair on it’s axis,
pull up on the cable located in the rear
of the chair until the locking mechanism
is released. Then gently tilt the backrest
to the desired position.
Be sure the chair is in a stationary po-
sition with the brakes locked
.
Figure 2
