background image

3

How To Operate

Before using for the first time, clean the appliance with a
damp cloth and dry thoroughly.
1. Plug in the power cord.
2. Press the ON/OFF button once to put the Halogen 

Burner in stand-by mode. The first indicator light will 
begin to flash. NOTE: If the appliance is not started 
within 20 seconds it will automatically turn off.

3. Press the +/- buttons to increase/decrease the 

temperature. NOTE: There are 6 different heating 
levels.

4. During operation the temperature of the Halogen 

Burner can be increased/decreased by using the 
+/- buttons.

5. Press the ON/OFF button to turn the unit off after you 

are finished cooking.

6. Keep the unit plugged in for at least 15 minutes after 

use. This allows the ventilator to cool the hot plate 
quicker. NOTE: After the unit has been turned off, the 
CAUTION light will continue to blink, indicating that 
the hot plate is still hot.

How To Clean

Appliance

1. Turn the unit OFF and unplug from outlet.
2. Allow the Halogen Burner to cool completely before

attempting to clean.

3. Do not immerse the appliance in water. Clean with a

damp cloth.

Cooking Plate

1. Burned food can be scraped off while the cooking plate

is still hot.  

2. To remove food stains, apply a ceramic glass cleaner to

the slightly warm surface of the cooking plate and gently

rub with a soft cloth or sponge.

3. If sugary foods get spilled on the cooking plate, clean

immediately, to avoid chemical reactions with the 

halogen heating element.

4. Brown stains that appear on the surface of the cooking

plate should be cleaned immediately with a ceramic

glass cleaner. These stains occur because of spilled water

or mist on the pans.

5. Do not use plastic utensils to clean the hot cooking 

surface, they will melt and stick to the cooking plate.  

NOTE: If this should happen, scrape the plastic off and

clean immediately while the cooking plate is still hot.

Summary of Contents for 16100













Reviews: