bio.x B200
Page 7 of 12
01/2010
Fine filter (9)
The optional fine filter, which can be fitted on the left-hand side of the unit,
should be checked
weekly
and cleaned if necessary. Release the filter cover
by turning it anti-clockwise. Remove the filter cartridge (9.1) and rinse it thor-
oughly under running water, or replace it with a new cartridge. Reinsert the car-
tridge and screw the casing firmly back into place. Ensure the seal is in the cor-
rect position.
Safety temperature limiter
In case of overheating the cleaning fluid, the power supply will be interrupted by the safety tempera-
ture limiter. To start again press red button. (see photo)
Cleaning fluid
The cleaning fluid has to be replaced if
-
there is a significant fall in the cleaning performance
-
when checking the fill level there are notable sediment deposits on the floor of the tank
Use the draining device (7) to drain the dirty fluid. Then the tank has to be freed from any sediment residue.
Please follow the same process when inserting the new fluid as for the initial operation.
Refill items
Accessories Description
Item
number
Bio-Power cleaning fluid
20-litre canister
175715
Bio-Power cleaning fluid
200-litre drum
169787
Additive for oil and grease degradation
100g can for 100 l detergent
168625
Set (cleaner and additive) for initial filling
and refills
4 x 20-litre canisters of Bio-Power cleaning fluid
100 g can of additives
173135
Cleaning fluid bio.x
20-litre canister
130032
Cleaning fluid bio.x
200-litre drum
161524
Replacement parts
(see also product description page 4)
Description Item
number
Filter insert for fine filter (optional)
Central support bracket and nylon filter
150043
172236, 172292, 176074
