6
Setup
Important:
Connect all cables securely and properly (with stereo cables: left with left, right with right), and
do not bundle them with the power cable.
1.
Use XLR cables, a stereo RCA cable, a digital coaxial cable, or a digital optical TOSLINK cable to
connect the
Outputs
(
Analog
or
Digital
) to the inputs of your external receiver, amp, powered
monitors, etc.
2.
Connect the
FM Antenna
on the back of the unit, if needed.
3.
After completing all the connections, use the included power cable to connect the
AC Input
to a
power outlet.
4.
Power on DN-350UI.
5.
To connect DN-350UI to a network,
turn the
Jog Dial
to select
System Settings
from the main
menu, and then choose
Internet Setup
. Use the
Wizard
to automatically search for and connect to
local networks. To manually configure network settings, choose
Manual Settings
. For wired network
connections, make sure DN-350UI is connected to your network switch or router by Ethernet cable
from the
Ethernet port
.
Example
Items not listed under
Introduction
>
Box Contents
are sold separately.
Powered Monitors
FM Antenna
USB Flash
Drive
Power
Receiver
Bluetooth Device
Router
