13
ENGLISH
o
Audible quick search ……………………………………… Manual Search
• Using this function, you can cue to a desired point within a track, either in
the forward or reverse direction.
• Release the Automatic/Manual search button (
8
/
6
or
7
/
9
) when
the desired point has been reached. Normal playback then continues.
(1) Manual Search Forward
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£
¢
ON
OFF
TRACK
1
5
2 3 4
6 7 8
9 101112
13141516
DISC
MIN
SEC
¤
‚⁄
‚‹ fi‚
1
2
3
4
5
(
7
/
9
)
1. Keep on pressing the Automatic/Manual search forward button (
7
/
9
)
for more than 0.5 seconds during playback. Playback of the track is sped
up.
• As a reference, the current track number and elapsed playback time within
the track are displayed.
• Manual search forward is approximately 4 times faster when the
Automatic/Manual search forward button (
7
/
9
) is kept on pressing
more than 5 seconds.
• If the Automatic/Manual search forward button (
7
/
9
) is kept pressed
after the end of the final track on the disc is reached, (
) is displayed and
manual search stops. To return to another point, press the
Automatic/Manual search reverse button (
8
/
6
) until (
) disappears.
• If the Automatic/Manual search forward button (
7
/
9
) is kept on
pressing and the end of the current track is reached during random play or
programmed play, the next track is searched and playback starts.
1. Keep on pressing the Automatic/Manual search reverse button (
8
/
6
)
for more than 0.5 seconds during playback. Reverse playback of the track is
sped up.
• As a reference, the current track number and elapsed playback time within
the track are displayed.
• Manual search in reverse is approximately 4 times faster when the
Automatic/Manual search reverse button (
8
/
6
) is kept on pressing
more than 5 seconds.
• If the Automatic/Manual search reverse button (
8
/
6
) is kept pressed
after the beginning of the first track on the disc is reached, (
) is displayed
and manual search stops. To return to another point, press the
Automatic/Manual search forward button (
7
/
9
) until (
) disappears.
• If the Automatic/Manual search reverse button (
8
/
6
) is kept on
pressing and the beginning of the current track is reached during random
play or programmed play, the manual search in reverse is canceled and
playback starts.
!0
To Cue and Stop Play ………………………………………………… Pause
(Remote control only)
(1) Cuing by Direct Selection
• Cuing by direct selection, then entering the Pause state, is convenient for
practicing vocals with background music.
1
2
(
3
PAUSE )
( 1 ~ 10 )
1. Press the Track Number buttons to set the number of the desired track.
2. Press the Pause (
3
PAUSE) button.
• To start play, press the Play (
1
PLAY) button or the Pause (
3
PAUSE)
button.
(2) Cuing by Program Selection
• After setting the desired track selections in a program, press the Pause (
3
PAUSE) button. The player will advance to the beginning of the 1st track in
program memory and wait in the Pause state.
!1
Synchronized Recording
Function …………………………… Synchronized Recording Function
Connecting the SYNCHRO jack with a DENON cassette deck which is
equipped with a SYNCHRO jack will allow synchronized recordings to be made.
• To use this function, be sure to connect the SYNCHRO jacks as well as the
output terminal (LINE OUT). (Refer to page 9 for connections.) Then, load a
disc.
• With the CD player in the stop or pause condition, starting a synchronized
recording at the cassette deck side will automatically cause the CD player to
start playing. (This is synchronized play.)
• The remote control indicator of the display will blink during synchronized
play.
NOTES:
• Synchronized play is also possible in the program mode.
• The repeat mode are cancelled when synchronized play is started.
• Except for the Stop (
2
STOP), Play (
1
PLAY) and TIME buttons, the buttons
will not operate during synchronized play.
• In the play condition, even if you start a synchronized recording at the
cassette deck side, CD player will not synchronize with the cassette deck
and the cassette deck becomes synchronized pause condition. In this case
push the Stop (
2
STOP) button of the cassette deck, set the CD player in
the stop or pause condition and start a synchronized recording at the
cassette deck side again.
• For further details, see the owner’s manual for the cassette deck that has
been connected.
i
To Stop Play Temporarily …………………………………………… Pause
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£
¢
ON
OFF
TRACK
1
5
2 3 4
6 7 8
9 101112
13141516
DISC
MIN
SEC
¤
‚⁄
‚‹ fi‚
1
2
3
4
5
(
3
PAUSE )
• Pressing the Pause button during play stops play at that point.
Pressing the Pause button once more starts play again from the same point.
1. Press the Pause (
3
PAUSE) button.
4th Track
5th Track
6th Track
Pause
2. Press the Play (
1
PLAY) button or the Pause (
3
PAUSE) button to start
play.
(2) Manual Search in Reverse
OPEN/CLOSE
DISC SKIP
5 DISC AUTOMATIC DISC LOADING SYSTEM
STOP
PAUSE
PLAY
PROG
PHONES
REPEAT
DCM-370
PCM AUDIO TECHNOLOGY / CD AUTO CHANGER
REMOTE
SENSOR
HDCD
£
¢
ON
OFF
TRACK
1
5
2 3 4
6 7 8
9 101112
13141516
DISC
MIN
SEC
¤
‚⁄
‚‹ fi‚
1
2
3
4
5
(
8
/
6
)
