Get
ting Star
ted
Connections
Oper
ation
Tr
oubleshooting
ENGLISH
Specifications
s
Network Setup
Make settings for wired LAN.
Network Setup
Make network settings.
F
Menu tree
F
Main Setup
Network Setup
a
Network Information
s
Network Setup
a
Network Information
Display network information.
[Items to be checked]
DHCP= ON or OFF
IP Address
MAC Address
Set
up
• If you are using a broadband router (DHCP function), there is no need
to make the settings at “Setting the IP Address” and “Setting the
Proxy”, since the DHCP function is set to “ON” in the POA-3012CI’s
default settings.
• If the POA-3012CI is being used connected to a network without the
DHCP function, the network settings must be made. In this case,
some knowledge of networks is required. For details, consult a
network administrator.
• If you cannot connect to the Internet, recheck the connections and
settings (
v
page 8).
• If you do not understand about Internet connection, contact your ISP
(Internet Service Provider) or the store from which you purchased
your computer.
•
DHCP (Dynamic Host Configuration Protocol)
:
These are systems by which the IP address and other network
settings are automatically set for the POA-3012CI, computer,
broadband router and network devices.
•
DNS (Domain Name System)
:
This is a system for converting the domain names used when
browsing Internet sites (for example, “www.denon.jp”) into the
IP addresses actually used for communications (for example,
“202.221.192.106”).
Wired LAN settings
Use this procedure to configure the Wired LAN settings.
1
Connect the LAN cable (
v
page 8).
2
Turn on the POA-3012CI (
v
page 17).
POA-3012CI performs automatic network setup due to the DHCP
function.
When connecting to a network that has no DHCP function,
perform the setting in step 3.
3
Set the IP address at the menu “Network Setup” –
“Network Setup”.
*Network Setup
DHCP
*DHCP
OFF
IP Address
192.168. 0. 1
Subnet Mask
255.255.255. 0
Default Gateway
0. 0. 0. 1
Primary DNS
0. 0. 0. 0
Secondary DNS
0. 0. 0. 0
q
Select “DHCP” and press the
SELECT/ENTER
knob.
w
Turn the
SELECT/ENTER
knob to set “DHCP” to “OFF”, then
press the
SELECT/ENTER
knob.
The DHCP function is disabled.
e
Input the address.
w
Set “OFF”.
e
Use the following buttons to input the address and press the
SELECT/ENTER
knob.
b
Button functions when entering address
SELECT/ENTER
knob : Turn ············Select
Press ··········Confirm
u
button :
Cursor to right
i
button :
Cursor to left
ZONE 6
button :
Setting during address entry
ZONE 5
button :
Cancel entry
IP Address
:
Set the IP address within the ranges shown below. The Network
function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
Subnet Mask
:
When connecting an xDSL modem or terminal adapter directly
to the POA-3012CI, input the subnet mask indicated in the
documentation supplied by your provider. Normally input
255.255.255.0.
Default Gateway
:
When connected to a gateway (router), input its IP address.
Primary DNS
Secondary DNS
:
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at “Primary DNS”. If there are
two or more DNS addresses, input the first one at “Secondary
DNS”.
r
Press the
SELECT/ENTER
knob.
Setup is complete.
b
When connecting to the network via a Proxy server, select
“Proxy” and press the
SELECT/ENTER
knob (
v
page 16 “Proxy
settings”).
q
Select “DHCP”.
1.POA-3012CI_ENG.indd 18
2008/04/08 9:25:49
