100
ENGLISH
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting
Return to previous menu
Setting items
Setting details
2ch Direct/Stereo
(Continued)
SW Mode
: Select low range signals to be reproduced by subwoofer.
•
LFE
: When the “2ch Direct/Stereo” – “Front” setting is set to “Large”,
the LFE signal alone is output from the subwoofer. Also, when the “2ch
Direct/Stereo” – “Front” setting is set to “Small”, the front channel low
range signal is added to the LFE signal output from the subwoofer.
•
LFE+Main
: The front channel low range signal is added to the LFE signal
output from the subwoofer.
This setting can be set made “2ch Direct/Stereo” – “Subwoofer” is
set to “Yes”.
Crossover
: Set the maximum frequency of the bass signal output from
each channel to the subwoofer.
•
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz
• This setting can be set made “2ch Direct/Stereo” – “Subwoofer” is set
to “Yes”.
• If the “2ch Direct/Stereo” – “Front” setting is “Large” and the
“Subwoofer Mode” setting is “LFE”, “Full Band” is displayed and the
setting cannot be made.
Distance FL
/
Distance FR
: Select the speaker.
•
0.0ft – 60.0ft (12.0ft)
/
0.00m – 18.00m (3.60m)
: Set the distance to
the speaker.
Set the difference in the distance between the speakers to less than
20 ft (6.0 m).
Level FL / Level FR
: Select the speaker.
•
–12.0dB – +12.0dB (0.0dB)
: Adjust the level of each channel.
Auto Surround Mode
Make setting for
memorizing surround mode
setting for each input signal
type.
ON
: Memorize settings. Automatically play with the last used surround
mode.
OFF
: Do not memorize settings. Surround mode does not change
according to input signal.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals listed
below.
q
Analog and PCM 2-channel signals
w
Dolby Digital and DTS 2-channel signals
e
Dolby Digital and DTS multi-channel signals
r
LPCM and DSD Multi-channel signals
• When playing in PURE DIRECT, the surround mode does not change
even if the input signal is changed.
MANUAL SETUP
Setting items
Setting details
EQ Customize
Set so that unused equalizer
settings are not displayed
when
MULTEQ
is pressed.
The equalizer mode in which
“Not Used” is selected
cannot be stored and
recalled in the Quick Select
function.
Audyssey
: Set when not using “Audyssey” equalizer.
•
Used
: Use.
•
Not Used
: Do not use.
Set so that “Audyssey” settings can be made when Audyssey® Auto
Setup is performed.
Audyssey Byp. L/R
: Set when not using “Audyssey Byp. L/R” equalizer.
•
Used
: Use.
•
Not Used
: Do not use.
Set so that “Audyssey Byp. L/R” settings can be made when
Audyssey Auto Setup is performed.
Audyssey Flat
: Set when not using “Audyssey Flat” equalizer.
•
Used
: Use.
•
Not Used
: Do not use.
Set so that “Audyssey Flat” settings can be made when Audyssey
Auto Setup is performed.
Manual
: Set when not using the “Manual” equalizer.
•
Used
: Use.
•
Not Used
: Do not use.
