103
Basic version
Simple version
Information
ENGLISH
Advanced version
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confi rm the setting
Return to previous menu
MANUAL SETUP
Setting items
Setting details
Rhapsody Account
Set or change Username
and Password (
v
page 46
“Listening to Rhapsody”).
Username
/
Password
/
Clear
• For character input, see page 78.
Napster Account
Set or change Username
and Password (
v
page 42
“Listening to Napster”).
Username
/
Password
/
Clear
• For character input, see page 78.
Network Info.
Display network information.
Friendly Name
/
DHCP
/
IP Address
/
MAC Address
Zone Setup
Default settings are underlined.
Set the audio to play back with multi-zone (ZONE2, ZONE3).
Setting items
Setting details
Bass
Adjust low frequency range
(bass).
–10dB – +10dB (0dB)
Treble
Adjust high frequency range
(treble).
–10dB – +10dB (0dB)
HPF
Make settings for cutting
the low range to reduce
distortion in the bass.
ON
: The low range is attenuated.
OFF
: The low range is not attenuated.
Lch Level
Adjust the left channel
output level.
–12dB – +12dB (0dB)
The “Lch Level” can be set when “Channel“ (
v
page 103) is set to
“Stereo“.
Rch Level
Adjust the right channel
output level.
–12dB – +12dB (0dB)
The “Rch Level” can be set when “Channel“ (
v
page 103) is set to
“Stereo“.
Channel
Set the signal output from
multi-zone.
Stereo
: Select stereo output.
Mono
: Select mono output.
When “Amp Assign” – “Assign Mode” (
v
page 95) is set to “Z2/3-
MONO”, the “Channel” setting is automatically set to “Mono”.
Setting items
Setting details
Volume Level
Set the volume output level.
Variable
: Volume adjustment is enabled by main unit and remote control
unit.
–40dB (41)
: Fix volume at –40 dB. Set when adjusting volume by external
amplifi er.
0dB (81)
: Fix volume at 0 dB. Set when adjusting volume by external
amplifi er.
When “Amp Assign” – “Assign Mode” (
v
page 95) is set to
“ZONE2”, “ZONE2/3” or “Z2/3-MONO”, the “Volume Level” setting
is automatically set to “Variable”.
Volume Limit
Make a setting for
maximum volume.
OFF
: Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
• This can be set when the multi-zone “Volume Level” setting (
v
page 103)
is “Variable”.
• This is displayed from 0 to 99 when “Volume Display” (
v
page 104) is set
to “Absolute”.
Power On Level
Defi ne the volume setting
that is active when the
power is turned on.
Last
: Use the memorized setting from the last session.
– – –dB (0)
: Always mute when power is turned on.
–80dB – 18dB (1 – 99)
: The volume is adjusted to the set level.
• This can be set when the multi-zone “Volume Level” setting (
v
page 103)
is “Variable”.
• This is displayed from 0 to 99 when “Volume Display” (
v
page 104) is set
to “Absolute”.
Mute Level
Set the amount of
attenuation when muting
is on.
Full
: The sound is muted entirely.
–40dB
: The sound is attenuated by 40 dB down.
–20dB
: The sound is attenuated by 20 dB down.
