139
Basic version
Simple version
Advanced version
ENGLISH
Information
Specifications
n
Audio section
•
Power amplifier
Rated output:
Front:
140 W + 140 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Center:
140 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
170 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround:
140 W + 140 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround back:
140 W + 140 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Front height / Front wide:
140 W + 140 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
170 W + 170 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
150 W x 2ch (8 Ω)
220 W x 2ch (4 Ω)
Output connectors:
4 – 16 Ω
•
Analog
Input sensitivity/Input impedance:
200 mV/47 kΩ
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
102 dB (IHF–A weighted, DIRECT mode)
Distortion:
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
•
Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input:
Format — Digital audio interface
•
Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output:
150 mV
Distortion factor:
0.03 % (1 kHz, 3 V)
n
Video section
•
Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω
Frequency response:
5 Hz – 10 MHz — +0, –3 dB (when “Video Convert” set to “OFF”)
•
Color component video connector
Input/output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω
P
B
/ C
B
signal — 0.7 Vp-p, 75 Ω
P
R
/ C
R
signal — 0.7 Vp-p, 75 Ω
Frequency response:
5 Hz – 60 MHz — +0, –3 dB (when “Video Convert” set to “OFF”)
n
HD Radio section
[FM]
[AM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10
–15
W)
Receiving Range:
87.5 MHz – 107.9 MHz
530 kHz – 1710 kHz
Usable Sensitivity:
1.5 μV (14.8 dBf)
20 μV
S/N (IHF-A):
MONO 78 dB
STEREO 68 dB
HD 85 dB
85 dB
Total harmonic Distortion (at 1 kHz):
MONO 0.1 %
STEREO 0.2 %
HD 0.02 %
0.02 %
n
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
780 W
0.1 W (Standby)
2.2 W (CEC standby)
Maximum external dimensions:
434 (W) x 171 (H) x 414 (D) mm (17-3/32” x 6-47/64” x 16-19/64”)
Weight:
18.5 kg (40 lbs 12.6 oz)
n
Main remote control unit (RC-1145)
Batteries:
R6/AA Type (two batteries)
Maximum external dimensions:
53 (W) x 224 (H) x 30 (D) mm (2-3/32” x 8-13/16” x 1-3/16”)
Weight:
178 g (6.3 oz, including batteries)
n
Sub remote control unit (RC-1148)
Batteries:
R03/AAA Type (two batteries)
Maximum external dimensions:
49 (W) x 220 (H) x 24.5 (D) mm (1-59/64” x 8-21/32” x 31/32”)
Weight:
114 g (Approx 4 oz) (including batteries)
For purposes of improvement, specifications and design are subject to change without notice.
