118
1. CD player (CD), CD recorder (CDR) system buttons)
2. Tape deck (TAPE) system buttons
Default setting = CD
The preset codes of a CDR can be recorded in the CD mode so
that the CD recorder can be operated.
It is only possible to set the preset memory for either the CD or
CDR.
To operate a DENON CDR player, preset “30626” or “31868”. To
return to operation of a DENON CD player, preset “31867”.
6
,
7
: Manual search (forward and
reverse)
2
: Stop
1
: Play
8
,
9
: Auto search (to beginning of
track)
3
: Pause
0 ~ 9, +10
: Number
Default setting = VCR (See page 121)
The preset codes of a TAPE can be recorded in the VCR mode so
that the tape deck can be operated.
It is only possible to set the preset memory for either the VCR or
TAPE.
To operate a DENON TAPE, preset “21471”.
6
,
7
: Manual search (forward and
reverse)
2
: Stop
1
: Play
8
,
9
: Auto search (to beginning of
track)
3
: Pause
0 ~ 9, +10
: Number
3. Tuner system buttons
•
,
ª
: Tuning up/down
BAND
: Switch between AM and FM
bands
MODE
: Switch between AUTO and
MANUAL
MEMO
: Preset memory
SFT
: Switching the memory block
CH +, –
: Preset channel up/down
1 ~ 8
: Preset channel
