73
4-4. Setting the HDMI/Component Out
1
Select “HDMI/Component Out” at the Video Setup
menu.
2
Display the HDMI/Component Out screen.
H D M I / C o m p O u t
* V i d e o S e t u p
A t o H D M I : O N
* H D M I / C o m p O u t
• Set the format of the signal up-converted to the HDMI monitor output or component output terminal.
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
3
q
Select the setting.
w
Select the parameter.
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
Analog to HDMI Convert:
• ON
:
Setting for converting analog video signals into HDMI signals.
• OFF
:
Setting for not converting analog video signals into HDMI signals.
Scaler:
• HDMI
:
The i/p scaler can be used when outputting the input analog video signal to the HDMI monitor output terminal.
• Component:
The i/p scaler can be used when outputting the input analog video signal to the component output terminal.
When “Analog to HDMI Convert” is set to “OFF”, the “Scaler” setting is automatically set to “Component” and fixed there.
Aspect:
• FULL
:
The video is output while maintaining the aspect ratio of the input video.
This mode is suited for playing back 16:9 video.
• NORMAL
:
A black band is added to the left and right of the input video and the video is output.
This mode is suited for playing back 4:3 video.
Resolution:
• 480p/576p :
When the video signal input is a video, S-Video or 480i/576i component video signal, the resolution is converted to
480p/576p and the signal is output from the monitor output terminal.
• 1080i
:
When the video signal input is a video, S-Video or 480i/576i/480p/576p component video signal, the resolution is
converted to 1080i and the signal is output from the monitor output terminal.
• 720p
:
When the video signal input is a video, S-Video or 480i/576i/480p/576p component video signal, the resolution is
converted to 720p and the signal is output from the monitor output terminal.
• 1080p
:
The input video signal is converted to a resolution of 1080p for output.
This cannot be selected when “Scaler” is set to “Component”.
• Through
:
The video signal input is output as such from the monitor output terminal without being converted.
Color Space:
• Y Cb Cr
:
The Y Cb Cr format video signals is output via the HDMI output connector.
• RGB
:
The RGB format video signals is output via the HDMI output connector.
RGB Mode Setup:
• Normal
:
Signals are output via the HDMI output connector with a digital RGB video range (data range) of 16 (black) to 235 (white).
• Enhanced
:
Signals are output via the HDMI output connector with a digital RGB video range (data range) of 0 (black) to 255 (white).
