Adjusting the volume
1
Use VOLUME
df
to adjust the volume.
0
The variable range differs according to the input signal and channel level setting.
0
You can also adjust the master volume by turning MASTER VOLUME on the main
unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE
:
.
0
MUTE indicator on the display flashes.
0
:
appears on the TV screen.
0
The sound is reduced to the level set at “Mute Level” in the menu. (
0
To cancel mute, either adjust the sound volume or press MUTE
:
again.
0
If
:
is displayed on the TV screen for more than 5 minutes when the
“Screensaver” is set to “On”, the
:
symbol moves randomly over the TV screen.
Playback a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/DVD
player.
1
Prepare for playback.
A
Turn on the power of the TV, subwoofer and player.
B
Change the TV input to the input of this unit.
2
Press POWER
X
to turn on power to the unit.
3
Press Blu-ray to switch an input source for a player
used for playback.
4
Play the Blu-ray Disc player or DVD player.
o
49
