FIRMWARE UPDATE PROCEDURE
1. Items necessary for update
Items necessary for update are as follows.
Update Type
Needed Part for Update
Requirement
Offered / not Offered
Standard Service Equipment
Not offered by D&M
Purchase from D&M Article code
Download from SDI
Via USB
USB flash drive (USB 2.0 : Min 1GB)
• We recommend a USB memory device
that has an LED installed.
Formatting FAT16 or FAT 32
X
-
"
Via OTA
Internet Connection by Broadband Circuit
-
X
-
-
Modem
-
X
-
-
Router
-
X
-
-
Ethernet cable
(CAT-5 or greater is recommended)
-
X
-
-
Table 1
Update download file when the DIGITAL PCB or network module is replaced
Model Name
Model Area
Download from SDI
AVR-X8500H
AVC-X8500H
ALL
avr_40.prod.update.factory.xxxx.zip
Table 2
Update download file when the firmware is updated (Two files, "HW component" and "LEGO component")
Model Name
Model Area
Download from SDI
For HW component
For LEGO component
AVR-X8500HE3
North America (E3)
Product ID : 000101020100
DPMS_AVR-X8500HALL_LEGO_xxxx.zip
heos_40.prod_x.xxx.xx.zip
AVC-X8500HE2
Europe (E2)
Product ID : 000101020200
DPMS_AVC-X8500HALL_LEGO_xxxx.zip
AVC-X8500HE1C
China (E1C)
Product ID : 000101020500
AVC-X8500HJP
Japan (JP)
Product ID : 000101020400
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
202
