30
Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey®
Setup.
1
Use
ui
to select “Parameter Check” and then press
ENTER
.
Audyssey Setup
Amp Assign
Channel Select
Parameter Check
Start
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
Audyssey Setup/Parameter Check
Distances
Levels
Crossovers
Speaker Config.
Equalizers
Restore...
Check Audyssey Setup Measurement results.
2
Use
ui
to select the item you want to check, then press
ENTER
.
Measurement results for each speaker are displayed.
Speaker Config.
Check the speaker configuration.
Distances
Check the speaker distance.
Levels
Check the speaker channel level.
Crossovers
Check the speaker crossover frequency.
Equalizers
Check the equalizer.
•
If “Equalizers” is selected, press
ui
to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use
ui
to switch the display between the different speakers.
3
Press
o
or
BACK
.
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey® Setup settings
If you set “Restore...” to “Yes”, you can return to Audyssey® Setup measurement result (value calculated
at the start by MultEQ® XT) even when you have changed each setting manually.
Set up speakers (Audyssey® Setup)
Making the network settings
(Network)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
1
“Connecting to a home network (LAN)”).
2
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in “Settings”
(
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
DVD
