Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Making detailed settings (Manual Setup)
Setting items
Setting contents
Amp Assign
Sets the signal output to the
speaker connected to the
SURR. BACK/AMP ASSIGN
terminals.
Normal :
The surround back channel audio signals are output.
ZONE2 :
The ZONE2 audio signals are output.
Front Bi-Amp :
The bi-amp audio signals are output. Set this for bi-amp
playback of the front speakers.
Front Height :
The front height channel audio signals are output.
Speaker Config.
Select speaker configuration
and size.
(bass reproduction capability)
NOTE
Select “Large” or “Small” not
according to the physical size
of the speaker but according
to
the
low
frequency
reproduction
capabilities
based on the frequency set
at “Crossover Frequency”
(
v
page 27).
Front :
Set the front speaker size.
Large :
Use of a large speaker that can adequately play back low
frequencies.
Small :
Use of a small speaker that has inadequate playback capacity for
low frequencies.
If “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
•
•
Center :
Set the presence and size of the center speaker.
Large :
Use of a large speaker that can adequately play back low
frequencies.
Small :
Use of a small speaker that has inadequate playback capacity for
low frequencies.
None :
Select when a center speaker is not connected.
•
“Large” is not displayed when “Front” is set to “Small”.
•
Even if “Center” has been set to “Large”, when “Front” is set to
“Small”, the “Center” setting automatically switches to “Small”.
•
•
•
Subwoofer :
Set the presence of a subwoofer.
Yes :
Use a subwoofer.
No :
Select when a subwooofer is not connected.
When “Front” is set to “Small”, “Subwoofer” can automatically set
to “Yes”.
•
•
•
Use this procedure to set the speakers manually or if you wish to change the settings made with
the Audyssey Auto Setup procedure.
Making the speaker settings (Speaker Setup)
Default settings are underlined.
See overleaf
Use this procedure to change the Audyssey Auto Setup settings or to change the various audio,
video and display settings.
The set can be used without changing these settings. Make these settings as necessary.
For a description of “Menu map” and operating instructions, see page 18.
Items that can be set with the Manual Setup procedure
n
Making the speaker settings
(
Speaker Setup
)
v
page 25
Making the HDMI settings
(
HDMI Setup
)
v
page 28
Making the audio settings
(
Audio Setup
)
v
page 29
Making other settings
(
Option Setup
)
v
page 30
Making the ZONE2 settings
(
ZONE2 Setup
)
v
page 30
n
Examples of Menu Screen Displays
Speaker Setup
HDMI Setup
Audio Setup
4-1.Speaker Setup
1.Amp Assign
2.Speaker Config.
3.Bass Setting
4.Distance
6.Crossover Freq.
5.Channel Level
[ENT]:Select [RTN]:Back
4-2.HDMI Setup
Auto Lipsync : ON
HDMI Audio Out : Amp
HDMI Control : OFF
[RTN]:Back
4-3.Audio Setup
1.EXT.IN SW Level
2.2ch Direct/Stereo
3.Auto Surround Mode
4.EQ Customize
[ENT]:Select [RTN]:Back
ZONE2 Setup
Option Setup
4-4.ZONE2 Setup
Level Lch : 0dB
Level Rch : 0dB
Vol.Display : Relative
Vol.limit : OFF
Mute Lev. : Full
Power On Lev: Last
[RTN]:Back
4-5.Option Setup
1.Volume Control
2.Source Delete
3.On-Screen Display
4.Quick Select Name
7.Setup Lock
6.Display
5.ZONE Rename
[ENT]:Select [RTN]:Back
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Set
tings
