Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Multi-Zone
Making detailed settings (Manual Setup)
Setting items
Setting contents
Speaker Config.
Select speaker configuration
and size.
(bass reproduction capability)
“S.Back” is displayed
when the “Amp Assign”
setting (
v
page 25) is
set to “Normal”.
“Front
Height”
is
displayed when the “Amp
Assign” setting (
v
page
25) is set to “Front
Height”.
NOTE
Select “Large” or “Small” not
according to the physical size
of the speaker but according
to
the
low
frequency
reproduction
capabilities
based on the frequency set
at “Crossover Frequency”
(
v
page 27).
Surround :
Set the presence and size of the Surround speakers.
Large :
Use of a large speaker that can adequately play back low
frequencies.
Small
:
Use of a small speaker that has inadequate playback capacity for
low frequencies.
None :
Select when the surround speakers are not connected.
“Large” is not displayed when “Front” is set to “Small”.
•
•
•
S.Back :
Set the presence, size and number of surround back speakers.
Large :
Use of a large speaker that can adequately play back low
frequencies.
Small :
Use of a small speaker that has inadequate playback capacity for
low frequencies.
None
:
Select when the surround back speakers are not connected.
2sp
:
Use two surround back speakers.
1sp :
Use only one surround back speaker. Surround back audio is output
from the surround back L terminal.
•
“Large” is not displayed when “Surround” is set to “Small”.
• Even if “S.Back” is set to “Large”, the “S.Back” setting is automatically
switched to “Small” if “Surround” is set to “Small”.
NOTE
Even when the Surround Back Speaker setting is other than “None”,
sound may not be emitted from the surround back speaker, depending
on the playback source. In this case, “Surround Back” setting other
than “OFF” (
v
page 45).
•
•
•
•
•
Front Height :
Set the front height speaker size.
Large :
Use of a large speaker that can adequately play back low
frequencies.
Small :
Use of a small speaker that has inadequate playback capacity for
low frequencies.
None :
Select when a front height speaker is not connected.
• “Large” is not displayed when “Front” is set to “Small”.
• Even if “Front Height” is set to “Large”, the “Front Height” setting
is automatically switched to “Small” if “Front” is set to “Small”.
•
•
•
Setting items
Setting contents
Bass Setting
Make the settings related to
playback of low frequency
signals (subwoofer and LFE).
This can be set when
“Speaker
Config.”
–
“Subwoofer” (
v
page
25) is set to “Yes”.
Subwoofer Mode :
Select low range signal to be reproduced by
subwoofer.
LFE :
Add the low frequency signal of the channel for which the speaker
size is set to “Small” to the subwoofer signal and output it.
LFE+Main :
Add the low frequency signal of all channels to the subwoofer
signal and output it.
• Play music or a movie source and select the mode offering the
strongest bass.
• Select “LFE+Main” if you want the bass signals to always be
produced from the subwoofer.
•
•
LPF for LFE :
Set the upper limit of the low frequency signals output from
the subwoofer.
80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz
•
Distance
Set the distance from the
listening position to the
speakers.
Measure the distance from
the listening position to the
speakers beforehand.
Unit :
Set the unit of distance.
Feet
Meters
•
•
Step :
Set the minimum variable width of the distance.
1ft / 0.1ft
0.1m / 0.01m
•
•
FL
(Front L)/
FR
(Front R)/
C
(Center)/
SW
(Subwoofer)/
SL
(Surround L)/
SR
(Surround R/
SBL
(Surr. Back L)/
SBR
(Surr. Back R)/
FHL
(Front Height L)/
FHR
(Front Height R)
:
Select the speaker you want to set, and set the
distance. Set the value that is closest to the measured distance.
0.0ft ~ 60.0ft / 0.00m ~ 18.00m
• The speakers that can be selected differ depending on the “Amp Assign”
(
v
page 25) and “Speaker Config.” (
v
page 25) settings.
• Default settings :
Front/Center/Subwoofer/Front Height : 3.6 meters (12 feet)
Surround/Surr. Back : 3.0 meters (10 feet)
NOTE
Set the difference in the distance between the speakers to less than 6.0
meters (20 feet). “Relocate Speaker” is displayed on the screen if an
inappropriate distance is set.
•
•
Default :
Reset all distance settings to factory default.
Yes :
Reset to the defaults.
No :
Do not reset to the defaults.
•
•
: Moves the cursor (Up/Down/Left/Right)
: Decision the setting
: Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Set
tings
