Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
ENGLISH
Multi-Zone
Set
tings
1
Turn off the power using
on the main unit.
2
Press
while simultaneously pressing
and
on the main unit.
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Restoring all the settings to as they were at the
time of purchase
(Resetting the Microprocessor)
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
n
Audio section
• Power amplifier
Rated output:
Front :
90 W+90 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
125 W+125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
90 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
125 W
(6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
90 W+90 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
125 W+125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
90 W+90 W
(8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
125 W+125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors:
Front, Center, Surround, Surround Back / Amp Assign:
6
～
16 Ω/ohms
• Analog
Input sensitivity / Input impedance:
200 mV / 47 kΩ/kohms
Frequency response:
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
100 dB (IHF-A weighted, DIRECT mode)
n
Video section
• Standard video connectors
Input / output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +1, –3 dB
• Color component video connector
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P
B
/ C
B
signal — 0.7 Vp-p, 75 Ω/ohms
P
R
/ C
R
signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 60 MHz — +0, –3 dB
n
Tuner section
[FM]
[AM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
-15
W)
Receiving Range:
87.5 MHz ~ 107.9 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.2 µV (12.8 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
2.8 µV (20.2 dBf)
STEREO 48.7 µV (45.0 dBf)
S/N (IHF-A):
MONO
70 dB
STEREO 67 dB
Total harmonic Distortion (at 1 kHz):
MONO
0.7 %
STEREO 1.0 %
n
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
5.5 A
0.3 W (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 377 (D) mm (17-3/32” x 6-47/64” x 14-27/32”)
Weight:
10.7 kg (25 lbs 5.7 oz)
n
Remote control unit (RC-1117)
Batteries:
R6/AA Type (two batteries)
Maximum external dimensions:
52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)
Weight:
184 g (Approx 6.5 oz) (including batteries)
z
For purposes of improvement, specifications and design are subject to change without notice.
Specifications
Tr
oubleshooting
Specifications
