Get
ting Star
ted
Connections
Set
tin
g
s
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Playing in ZONE2 (ZONE2 Function)
This function allows you to play sound in rooms other than the main
zone where multi-channel sound is played.
Connecting and Setting the Speakers
Amp
Assign
mode
setting (
v
page 33) and
the audio signals that
are output
Connecting the speakers
ZONE2
ZONE2
Output signal :
Stereo (L / R)
w
q w
q
ZONE2
Audio Output
There are two methods to do this, as described below. Choose one
of the methods.
q
Zone playback by speaker output
w
Zone playback by audio output (PRE OUT)
Use an external amplifier.
The ZONE2 audio signals are output from the AVR-990’s SURR
BACK/AMP ASSIGN speaker terminals using the amplifier assignment
function.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
We recommend using high quality pin-plug cables for audio
connections in order to prevent noise.
When the input source to which the digital input connectors
(OPTICAL/COAXIAL) are assigned is selected in ZONE2, playback
is only possible if the digital signal being input is in PCM (2-channel)
format.
It is not possible to play the digital audio signals input from the HDMI
terminals in ZONE2.
When certain digital signals are being input, noise may be output
from the ZONE2 audio output connectors.
•
•
•
•
Audio Connections (ZONE2)
The audio signals of the AVR-990’s ZONE2 audio output terminals are
output to the ZONE2 amplifiers and played on these amplifiers.
"69*/
R
L
AVR-990
MAIN ZONE
ZONE2
Also be sure to read the operating instructions of the connected
devices.
Video Output
The video signals of the AVR-990’s ZONE2 video output terminal are
played by the ZONE2 TV.
7*%&0
*/
7*%&0
;0/&
NOTE
It is not possible to output video signals input to the HDMI or
component terminals to ZONE2.
MAIN ZONE
AVR-990
q
ZONE2 Playback by Speaker Output
w
ZONE2 Playback by Audio Output
(PRE OUT)
Video Connection
ZONE2
