9
ENGLISH
Advanced version
Simple version
Information
Basic version
Basic connections
R
L
AUDIO
VIDEO
VIDEO IN
Y
P
B
P
R
COMPONENT
VIDEO IN
R
R
L
L
AV receiver
Important information
•
Connect this unit as follows before using. Make connections according to the equipment you are
connecting.
•
Some settings of this unit may be necessary depending on the connection method. Check each
connection item for more information.
•
Select the cables (sold separately) according to the components being connected.
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components being
connected.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.
Connecting an AV receiver
For connecting using an HDMI cable, see “Connect” (
v
page 4). This section describes the connections
not using an HDMI cable.
Connecting to an AV receiver with an analog 2-channel audio
input terminal
• This connection is recommended when the specifications of an AV receiver connected to the unit are
as follows:
• Not supporting HDMI input
• Not supporting digital audio(coaxial) input
• Select the connector to use and connect the device.
Cables used for connections
Audio and video cable
Audio and video
cable
(supplied)
R
L
R
L
(White)
(Red)
(Yellow)
Video cable
Component video
cable
(sold separately)
(Green)
(Blue)
(Red)
1.DBP1611E3_ENG_11A.indd 9
2011/07/23 10:39:47