background image

II

ENGLISH

2

NOTE ON USE

FCC INFORMATION (For US customers)

1. PRODUCT

This product complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this product may not cause harmful
interference, and (2) this product must accept any interference received,
including interference that may cause undesired operation.

2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT 

This product, when installed as indicated in the instructions contained in this
manual, meets FCC requirements. Modification not expressly approved by
DENON may void your authority, granted by the FCC, to use the product.

3. NOTE

This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.  These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user is
encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the local retailer authorized to distribute this type of product or

an experienced radio/TV technician for help.

This Class B apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.

Copyrights

2

It is prohibited by law to reproduce, broadcast, rent or play discs in public
without the consent of the copyright holder.

2

La reproduction, la diffusion, la location, le prêt ou la lecture publique de ces
disques sont interdits sans le consentement du détenteur des droits
d’auteur.

2

De acuerdo con las leyes está prohibido reproducir, emitir, alquilar o
interpretar discos en público sin la autorización del propietario de los
derechos de autor.

• Avoid high temperatures.

Allow for sufficient heat dispersion when installed
in a rack.

• Handle the power cord carefully.

Hold the plug when unplugging the cord.

• Keep the apparatus free from moisture, water, and

dust.

• Unplug the power cord when not using the

apparatus for long periods of time.

* (For apparatuses with ventilation holes)

• Do not obstruct the ventilation holes.

• Do not let foreign objects into the apparatus.

• Do not let insecticides, benzene, and thinner come

in contact with the apparatus.

• Never disassemble or modify the apparatus in any

way.

1.DCM-390_290_ENG_Last  06.4.13 4:33 PM  Page 3

Summary of Contents for DCM-290

















Reviews: