6
ENGLISH
7
CONNECTIONS
• Do not plug in the AC cord until all connections have been
completed.
• Be sure to connect the left and right channels properly (left
with left, right with right).
• Insert the plugs securely. Incomplete connections will
result in the generation of noise.
• Note that binding pin plug cords together with AC cords or
placing them near a power transformer will result in
generating hum or other noise.
• Noise or humming may be generated if a connected audio
equipment is used independently without turning the
power of this unit on. If this happens, turn on the power of
the this unit.
(1) Speaker system connections
•
Use speaker cords with twisted wire cores and a diameter
of 0.6 to 1.5 mm. Never use cords thicker than 1.5 mm or
single-wire cords, as they may damage the speaker
terminals.
•
Be sure to interconnect the polarities of the terminals on the
speakers and main unit (
≈
to
≈
,
√
to
√
).
•
When making connections, be careful that none of the core
wires of the speaker cords stick out and touch neighboring
terminals, other speaker cords or the rear panel.
•
Speakers with an impedance of 6 to 16
Ω
/ohms can be
connected for use as center and surround speakers.
NOTE:
NEVER touch the speaker terminals when the power is
on.
Doing so could result in electric shocks.
•
The protector circuit may be activated if the set is played for
long periods of time at high volumes when speakers with an
impedance lower than the specified impedance are
connected.
Connection the speaker terminals
1. Push the lever.
2. Insert the cord.
3. Return the lever.
2
Connect using the speaker cords included with the USYS-
1000.
Be sure to turn off the power of the ADV-1000 when
connecting the speaker units to it.
•
Use the included speaker cords to connect the input
terminals on the backs of the speaker units (see diagram at
right) to the speaker output terminals on the ADV-1000.
Note that if the polarities are not properly interconnected,
the phase may be off and the sound may be unnatural (no
bass).
NOTE:
DO NOT touch the speaker terminals when the power is on.
Doing so could result in electric shock.
SPEAKER SYSTEMS
6 16
R
L
IMPEDANCE
CENTER
SURROUND
R
L
FRONT
SUB
WOOFER
IN
V.AUX
OUT
IN
TV/DBS
DIGITAL(OPTICAL)
IN
OUT
IN
IN
TV/DBS
IN
V.AUX
VCR
MON.OUT
S VIDEO
IN
OUT
IN
IN
TV/DBS
IN
V.AUX
VCR
MON.OUT
VIDEO
R
L
IN
OUT
IN
IN
IN
OUT
V.AUX
TV/DBS
VCR
CDR/
TAPE
PRE OUT
SUB WOOFER
AM
FM COAX. 75
LOOP ANT.
AUDIO
Y
C
B
COMPONENT VIDEO OUT
C
R
Super woofer
(USW-1000)
Surround speaker
(USC-A1000)
(L)
(R)
Speaker cord B (length:
approx. 3 meters)
(included)
Speaker cord A
(length: approx.
10 meters)
(included)
Speaker cord A (length:
approx. 10 meters)
(included)
Speaker cord B
(length: approx.
3 meters)
(included)
Speaker cord B (length: approx. 3 meters)
(included)
Speaker cord B (length: approx. 3 meters)
(included)
(L)
(R)
Front speaker
(USC-A1000)
Center speaker
(USC-C1000)
Front speaker
(USC-A1000)
