SPECIAL MODE
Special mode setting button
b No. 1-1 : While the power is on, hold down buttons "A", "B", and "C" for at least 5 seconds .
b No. 1-2 : While the power is on, hold down buttons "A" and "B" for at least 5 seconds .
b No. 1-3 : While the power is on, hold down buttons "A" on the remote control for at least 10 seconds.
b No. 2 : While the power is on, hold down buttons "A" for at least 5 seconds .
No.
Mode
Button A Button B Button C
Descriptions
1-1 Version Display Mode for MTK
SOURCE
VOL-
VOL+
The firmware version is display.
(See
1-2 Version Display Mode for MCU
SOURCE
BT
-
The firmware version is display.
(See
1-3 Version Display Mode for Region
DIALOG
ENHANCER
LOW
-
-
Displays the region code.
(See
2 Initialization Mode
RESET
-
-
All LEDs light up three times after initialization.
(See
)
3 Demo Mode
-
-
-
Demo Modes are ways to configure the sound bar with specific settings which are more desirable or even required for certain
commercial retail point of sale installations.
(See
Top side
Front side
Rear side
X
SOURCE VOL- VOL+
LED1
LED4
RESET
DIALOG
ENHANCER
LOW
54
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
