CD AUTO PLAY
When the CD tray is closed, the unit can detect the DISC, automatically
switch the input source to DISC and start playback of the disc.
ON
(Default)
:
Performs automatic playback.
OFF:
Does not perform automatic playback.
SPK OPTIMISE
An optimizing filter suited for the properties of the speakers (SC-M40) can
be used.
ON
(Default)
:
The response is optimized for the speakers
(SC-M40, supplied).
OFF:
The response is flat.
H/P AMP GAIN
Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the “Low” side if the headphones have low impedance and on the
“High” side if they have high impedance.
LOW
(Default)
:
Set the gain of the headphone amplifier to
“Low”.
MID:
Set the gain of the headphone amplifier to
“Mid”.
HIGH:
Set the gain of the headphone amplifier to
“High”.
0
The headphone volume varies depending on the “H/P AMP GAIN” setting.
Decrease the volume or mute the audio first if changing this setting while listening
to audio.
51
