5
S
etup
Items not listed under
Introduction >
Box Contents
are sold separately.
For examples of how you could set up DN-200WS, please see the
Example
diagram later in this section.
1.
Use either XLR cables or 1/4” (6.35 mm) cables to connect the DN-
200WS’s
outputs
(balanced or unbalanced) to your loudspeakers,
mixer, amplifier, or other device that accepts line-level inputs (this
device must be powered
off
).
Important:
For stereo operation, make sure left (
L
) and right (
R
)
outputs are connected to left and right inputs, respectively.
2.
Use the included power adapter to connect DN-200WS’s
power input
to a power outlet.
Important:
Do not use DN-200WS near a microwave oven, cordless
phone, Bluetooth
®
device, or other wireless device operating on the
2.4 GHz frequency, which can interfere with the reception.
3.
If you are using a mixer, make sure all of its connections are secure,
and power it on.
4.
Power on your loudspeakers
last
.
