8
AP Mode
To set up DN-200W
S
in AP Mode:
1.
If the
AP Mode Light
is off, press and hold the
Mode
Button
for 3
seconds.
2.
On your wireless device, enter the page or control panel used to select
a wireless network.
3.
From the list of wireless networks, select DN-200WS. By default, this
is the one with
DN-200W
S
in the name followed by a unique code for
your particular unit.
If you already entered a new network name in the
AP
SS
ID
field in the
S
ettings
page, select that name instead. The unit’s code appended to
the new name.
4.
Enter the password for the wireless network. The default is
pr215denn
.
If you already entered a new password in the
AP Password
field in the
S
ettings
page, enter that password instead.
If you left the
AP Password
field empty, no password is required.
Your wireless device is now connected to DN-200WS. Play audio on
your wireless device to send it from DN-200WS’s
outputs
to your
loudspeakers or mixer.
Note:
To learn how to enter the settings for each mode (SSID,
password, etc.), see the following
Settings Page
section.
