ENGLISH
42
(3) Detailed Description of Preset Functions
(* = initial setting)
1)
“Preset Type (*)” (Three different sets (types) of presettings can be made and used for different purposes.)
* Preset Type1
: Set to preset type 1.
Preset Type2
: Set to preset type 2.
Preset Type3
: Set to preset type 3.
2)
“Finish (*)”
Finish Stop
: Stop mode is set after track playing is finished.
* Finish Next
: Standby mode is set at next track after track playing is finished.
Finish Rescue
: Standby mode is set at playback start position after track playing is finished.
3)
“CueDet. OFF (-**)dB”
* CueDet.OFF
: Sound is not detected when cueing.
CueDet.(-**)dB
: Sound detection level setting for cueing. (-72/-66/-60/-54/-48/-42/-36)
4)
“Auto Inc OFF (*)”
* Auto Inc OFF
: No auto increment of track number.
Auto Inc Dig.
: Track number is automatically incremented during digital recording using subcodes on CDs or MDs (Q codes) or start
IDs on DATs.
Auto Inc Det.
: Track number is automatically incremented during recording when level set in “5) “Inc Det. (-**)dB” setting is
detected.
5)
“Inc Det. (-**)dB”
Inc Det.(-**)dB
: Sound detection level for auto increment function. (-72/-66/*-60/-54/-48/-42/-36)
6)
“Pre UTOC OFF (ON)” (Playback is possible up to that point even if power supply is cut off during recording or if recording stops due to some
problem.)
* Pre UTOC OFF
: Pre-UTOC function off.
Pre UTOC ON
: Pre-UTOC function on.
7)
“UTOC Manual (Auto)”
* UTOC Manual
: UTOC is written by pressing TOC WRITE button after editing is completed.
UTOC Auto
: UTOC is written automatically when editing is completed.
8) “RecStart
(-**)dB”
RecStart (-**)dB
: Sound detection level for auto record start function. (-72/-66/*-60/-54/-48/-42/-36)
9)
“Rec Offset (*)” (Recording can be started before sound detection during auto record start operation.)
Rec Offset (*)
: Recording starts the set number of seconds before level detection. (*OFF/1s/2s/3s/4s/5s)
10) “Rec Stereo (Mono)”
* Rec Stereo
: Record in stereo.
Rec Mono
: Record left channel signal in mono.
11) “SCMS INH (ENA)”
* SCNS INH
: Record onto disc same code as copy prohibit code in recording source.
SCMS ENA
: Record copy prohibit code on disc according to SCMS.
12)
PitchAuto OFF (ON)”
* PitchAuto OFF
: Play pitch data stored on disc not used.
PitchAuto ON
: Play disc at play pitch stored on disc.
13) “Sleep ON (OFF)”
* Sleep ON
: Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or manual
search mode.
Sleep OFF
: Do not automatically turn the servo functions off.
14) “FS OFF (***kHz)” (This setting can only be made when an optional FS converter is mounted.)
* FS OFF
: Do not use the FS converter.
FS (***kHz)
: Select the digital output FS. (32 kHz/44.1 kHz/48 kHz)
15) “Hot Start OFF (ON)” (Hot start can be set when optional hot start unit is mounted.)
* Hot Start OFF
: Hot start off.
Hot Start ON
: Hot start on.
