8
ENGLISH
1 PART NAMES AND FUNCTIONS
(1) Front Panel
q
Cartridge insertion slot
• Insert the cartridge as indicated by the arrow on the top.
• Once the cartridge is partially inserted.
w
Display
e
PROGRAM ON/OFF/LEVEL START button
PROGRAM ON/OFF (Normal mode)
• When this button is pressed while the PROGRAM IN button is
lit, the program play mode is set.
• The button lights during the program play standby and play
modes.
• When the button is pressed during the program play standby
or play mode, the program play mode is cleared.
LEVEL START (REC mode)
• When this button is pressed during the recording pause mode,
the auto level start recording mode is set.
• The button flashes when the auto level start recording mode is
set.
• When the button is pressed again, the auto level start
recording mode is canceled.
r
PLAY MODE switch
• When this switch is turned, the play mode select.
t
Select knob
• Turn this knob to select the next track to be played.
• Turn the knob clockwise by one click to move one track
forward, counterclockwise by one click to move one track
backward.
• When the knob turned while pressing it in, one click
corresponds to 10 tracks.
• In the preset mode, use this knob to set and enter preset
setting.
• When setting programs, use this knob to select, enter and
check the program.
• In the cue point direct search mode, use this knob to select
the cue point.
• The editing mode is set when the knob is turned and pressed
while selecting the editing function.
y
REC button
• When this button is pressed during the stop, standby or pause
mode, the recording pause mode is set.
• When the button is pressed during recording, the track
number is incremented.
• The button lights when the recording or recording pause mode
is set
u
MODE button
• Use this button to switch between the normal mode
(recording and playback) and editing mode.
• When pressed the STANDBY/CUE button while pressing this
button, the preset mode is set.
i
CUE SEARCH button
• When this button is pressed during the standby, pause, search
or play mode, the cue signal point direct search mode is set.
When pressed again, the direct search mode is canceled.
• The button lights when the direct search mode is set.
o
6
SEARCH and
7
SEARCH buttons
• Use these buttons to change the play start position and for
program operations.
!0
END MON/CLEAR button
END MON (Normal mode)
• Press this button in the standby mode to monitor the end of
the track. (End Monitor)
• The button lights when the end monitor mode is set.
CLEAR (Edit mode)
• The button is used for editing operation and for clearing
characters.
!1
STANDBY/CUE button
• When this button is pressed during the play or pause mode,
the pickup returns to the position at which playback started
and the standby mode is set.
(Back Cue)
• When pressed during playback when the next track has been
programmed, the programmed track is searched for and the
standby mode is set.
• The button lights when the standby mode is set.
• When the button is pressed during the recording or recording
pause mode, recording stops, the pickup returns to the
recording start position and the standby mode is set.
• When the button is pressed during the cue direct search
mode, the cue point is searched.
• When the button is pressed while pressing the MODE button,
the preset mode is set.
!2
PLAY/PAUSE button
• Press this button in the standby, pause or manual search
mode to begin playback.
• Press the button in the stop mode to search for the first track
and begin playback.
• When the button is pressed in the recording pause mode,
recording starts.
• The button lights when the play or recording mode is set.
• When the button is pressed during playback, the pause mode
is set. The button flashes while the pause mode is set.
• When the button is pressed during recording, the recording
pause mode is set. The button flashes when the recording
pause mode is set.
!3
DISP/CAPS/NUM button
DISP (Normal mode)
• When the button is pressed for over 0.5 seconds, the
character display switches between the disc name, track name
and date, in that order.
• The date is only displayed when the date display is preset.
(Refer to Page 13.)
• When the button is pressed for less than 0.5 second, the time
display switches between the remaining time (REMAIN) and
elapsed time (ELAPSED).
CAPS/NUM (REC, Edit mode)
• When the button is pressed while editing names, the selected
characters switch between capital letters, small letters,
numbers and symbols, in that order.
!4
PROGRAM IN/CUE WRITE button
PROGRAM IN (Normal mode)
• Press this button to set the program input mode.
• The button will not function during the play mode.
• The button flashes when in the program input mode.
• The button lights when a program is set.
