12
Before use
Part names and
functions
Connections
Basic
operations
Fader
Start function
USB settings
Troubleshooting
IndeX
specifications
System diagram
Effector
function
The fader start function controls playback/pause of the CD/Media
player using the fader control on the unit by sending a fader command
to the player.
Connect the FADER terminal on this unit to a FADER compatible DJ
player using a 3.5mm stereo mini plug cable in advance.
Channel fader start
1
Switch the
CH FADER START
to ”ON”.
2
Adjust
SOURCE SEL
to match the CD input (”CD1”
or ”CD2”).
3
Move the channel fader knob for the CD input
channel to the lowest position.
The player switches to CUE up status.
4
Move the channel fader knob upwards.
The CD player starts playback.
If the channel fader knob is then moved all the way down, the
player stops.
Fader start function
Cross fader start
This section explains how to start playback for a CD/Media player
connected to CH1.
1
Switch the
CROSS FADER START
to ”ON”.
2
Turn the CH1
SOURCE SEL
to ”CD1”.
3
Slide the cross fader all the way to the ”2” (CH2)
position.
4
The player switches to CUE up status.
5
Set
CROSS
to a position other than ”THRU”.
6
Move the cross fader in the opposite direction.
The player starts playback.
NOTE
If you set
CROSS
to the “THRU” position, the cross fader start
function will be disabled.
CROSS
SOURCE SEL
クロスフェーダー
チャンネルフェーダー
CROSS FADER START
CH FADER START
Cross fader
Channel fader
Summary of Contents for DN-X600
Page 1: ...Professional DIGITAL DJ Mixier DN X600 Owner s Manual ...
Page 28: ......
