– 12 –
EN
1. DIGITAL OUT JACKS
Use either an optical or coaxial digital cable to connect to an AV amplifier with a built-in decoder (AV control centre).
2. 2ch AUDIO OUT JACKS (Extra jacks for analogue audio)
Connect to the Audio input jacks of A/V-compatible TV or wide screen TV, Stereo system.
(The sound of DVD-Audio and Super Audio CD discs is not output.)
3. VIDEO OUT JACK
Use a video cable to connect this jack to the Video input jack on your A/V-compatible TV, widescreen TV or Stereo system.
4. COMPONENT VIDEO OUT JACKS
Use these jacks if you have a TV with Component Video in jacks. These jacks provide C
R
, C
B
and Y video. Together with
S-Video, Component Video provides the best picture quality.
5. S-VIDEO OUT JACK
Use the S-Video cable to connect this jack to the S-Video jack on your A/V-compatible TV or widescreen TV for a higher
quality picture.
6. AV1 JACK
Connect to the 21-pin scart jack of a TV.
(The sound of a DVD-Audio and a Super Audio CD is not output.)
7. 5.1ch AUDIO OUT JACKS
Use the speaker cables to connect these jacks to the 5.1ch AUDIO IN jacks on your AV amplifier with 5.1-channel input
terminals.
NOTES
• Be sure not to use both the AV1 jack and component Video jacks for video output at the same time.
• When changing the VIDEO OUT setting (SCART or COMPONENT), connect to a VIDEO jack or an S-VIDEO jack on the
TV. If the setting is changed, for example, to COMPONENT while the AV1 jack is connected to the TV, a distorted video sig-
nal may be output.
CONNECTIONS
AV1
1
2
3
7
4
5
6
Description - rear panel
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” and “DTS Digital
Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital
Theater Systems, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
E57D2/D5_UK.QX33 03.7.2 8:00 PM Page 12
