The following transition occurs during connection to the network. Refer to "
QSG
".
Not connected
Press "Connect" but-
ton.
Connection estab-
lished between HEOS
and smartphone
Connected to the
network
When network
connection setup is
complete
Amber : Solid
Green : Blinking
Green : Solid
Blue : Blinking
Blue : Solid
Time-out
Red : Solid (7sec.)
The following transition occurs when the "
Bluetooth
" button is pressed.
Bluetooth Pairing enabled
Pairing successful
Green : Blinking Twice
Repeated
Blue : Blinking Once
Repeated
Pairing failed
Red : Solid (7sec.)
8. When connecting to network (Setup Assistant)
9. Bluetooth
The following transition occurs when this unit switches to standby.
Network con-
nected
Quick Start mode
No access over
20 min.
Blue : Solid
Blue : Solid
(Dimmer)
Access from app
Not connected
Not connected
Deep Standby
No access over
20 min.
60 min. later.
Amber : Solid
Amber : Solid
LED : Off
Access from app
Button operation
Connected to the
network
The indicators are lit as shown below when the "
Volume
" button and "
Mute
" button are pressed.
"Volume" button
"Mute" button
Blue : Fast Blinking
Blue : Slow Blinking
The following transition occurs when "
Submit Diagnostics
" is performed from the HEOS app.
Operations in HEOS app :
Settings
-
Advanced
-
Submit Diagnostics
Network connected
Sending diagnostic data
Diagnostic data sent
Blue : Solid
Purple : Blinking
Blue : Solid
Time out in HEOS app
Red : Blinking Once
10. Standby
11. Volume button and Mute button
12. Submit Diagnostics
Status LED
Connect in Status LED
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
51