LED STATUS
The following transition occurs during an update. The same occurs in network and USB updates.
The network connection is
complete
FIRMWARE UPDATE PROCE-
DURE
Rebooting
Setting complete
Network connection com-
plete
Blue : Solid
Amber : Blinking
Blue : Slow Blinking
Blue : Solid
Amber blinking = About 250ms On/Off
The following transition occurs during a Service Region Settings update.
Connect USB
Change region
Change complete
END
Blue : Solid
Green : Blinking
Blue : Blinking(
X
times)
Blue : Solid(7sec.)
X
=The indicator blinks the same number of times as the region number being set. (North America=1, Europe=2, Japan=3, Australia=4,
Korea=5)
The following transition occurs during a service release type update.
Connect USB
Change release type
Change complete
END
Blue : Solid
Green : Blinking
Blue : Blinking (3 time)
Blue : Solid (7sec.)
The following transition occurs on startup.
Power off
Starting
Setting complete
Connected to network
Led : Off
Blue : Blinking
Blue : Solid
Setup not completed
Refer to "
QSG
".
Set up the network connec-
tion
Amber : Solid
1. Updating
2. Updating (Service region settings)
3. Updating (Service Release Type)
4. On startup of HEOS (when power is turned on)
Press and hold the "
Bluetooth
" button before inserting the power plug, then insert the power plug
while holding down the button and wait for more than 5 seconds.
Network connected
Resetting to factory default
Starting
Not set up
Blue : Solid
Amber : Blinking
Blue : Blinking
Amber : Solid
(Blinking -> lit)
*Blue indicator blinks mo-
mentary during the process
Amber Blinking = About 750ms On/Off : About 130sec
Press and hold the "
Bluetooth
" and "
Connect
" buttons for 5 seconds or more while connected to the
network.
Network connected
Soft reset start
Starting
Not set up
Blue : Solid
Amber : Fast Blinking
Blue : Blinking
Amber : Solid
(Blinking -> lit)
Amber Blinking = About 250ms On/Off : About 25sec
The following transition occurs on startup.
Power off
Starting
Critical Error
Firmware Error
Led : Off
Blue : Slow Blinking
Red : Slow Blinking
Critical Error
Hardware Error
Red : Fast Blinking
Slow Blinking : 750ms On/Off, Fast Blinking : 250ms On/Off
5. Factory Reset
6. Software Reset (Clear user settings)
7. Critical Error
Status LED
Connect in Status LED
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
50
