40
2.2. No picture or sound is output (HDMI 1/2 Front input)
YES
YES
YES
NO
NO
NO
NO
NO
YES
YES
YES
No picture or sound is output
Check the HDMI/DVI cable
connection
Is the HDMI/DVI cable
properly connected?
Are you using a certified
HDMI cable (one with the
HDMI stamp)?
Are you using an HDMI/DVI
cable less than 5 meters in
length?
Are the picture and sound
output when another HDMI/
DVI cable is used?
Are you using an HDMI/DVI
selector, repeater or a device
for improving picture quality?
Is the BD/DVD player's HDMI
output setting correct?
Are the picture and sound
output when the BD/DVD
player's resolution is changed?
Are the picture and sound
output when a different BD/
DVD player's is used?
When using a DENON BD/DVD player's, is the fluorescent display
tube's "HDMI" indicator lit? If using a non-DENON BD/DVD player's,
proceed to "YES".
Is sound output from the set's speaker terminals when the TV's power
is turned off or the connection cable between the TV and the set is
disconnected?
There may be a problem with
the HDMI/DVI cable. Check
the connection.
Use a certified HDMI cable
(one with the HDMI stamp).
Replace the HDMI/DVI cable
with one that is less than 5
meters in length (2 meters
recommended) to check.
The HDMI/DVI cable is
defective.
Disconnect everything and
connect only the HDMI/DVI
cable to check
Check the HDMI output setting,
referring to the BD/DVD
player's operating instructions.
Set the BD/DVD player's output
resolution to a resolution with
which the TV is compatible.
The BD/DVD player's is
defective.
The BD/DVD player's may
not be compatible with HDCP
repeaters. Ask the BD/DVD
player's manufacturer.
NO
NO
NO
YES
YES
YES
YES
YES
YES
Summary of Contents for S-5BD
Page 54: ...54 ANALOG VIDEO OUTPUT SIGNAL Signal Color Bar 100 Composite S5BD Oscilloscope 75ohm Loard...
Page 135: ...135 ADAU1328BSTZ 8U 310035 IC103 66 AVR 2310CI 2310 890 AVC 2310 ADAU1328 IC301 HDMI B D...
Page 147: ...147 2 FL DISPLAY FLD 19 ST 02GINK FL851 PIN CONNECTION GRID ASSIGNMENT...
Page 148: ...148 ANODE CONNECTION...
