3
1.
Product Technology
DeNovix Spectrophotometers / Fluorometers are compact instruments with an
integrated processor and a high-resolution touchscreen. The software utilizes
application specific icons along with the Android™ operating system to provide
an intuitive, easy-to-use instrument for both absorbance and fluorescence
measurements.
The SmartPath
®
technology automatically adjusts the microvolume mode
pathlengths to enable measurements of samples with absorbances that range
between 0.015 to 750 AU (1 cm pathlength equivalent).
FX models include a fluorescence mode while the DS-11+ and DS-11 FX+
instruments also enable cuvette-based measurements for low concentration
samples and basic absorbance kinetic studies.
Installation and Safety
1.
Remove all packing materials including the protective cover on the screen.
2.
Plug the unit into a 100-240 VAC, 50-60/Hz receptacle using the grounded
power supply (CUI MPN: ETSA120330U-P5P-SZ, Transformer Dest Top 12V
40W, Lead free / RoHS Compliant) included with each unit.
3.
Turn on the power switch located in the back of the instrument. The Android-
based operating system will boot up in less than a minute.
4.
Use the Shut Down icon (accessed from within each app or on the Home
screen) to do a soft power down. Toggle the power switch to restart the
instrument.
Cautions
DO NOT REMOVE COVER
No operator serviceable components inside. Refer servicing to qualified personnel.
The DS-11 is designed for indoor use under the following conditions:
Temperature: 15˚ to 35˚ C
Humidity: 35 to 65 %
Use only the power supply provided with the instrument. Use of the instrument in
any manner not specified by the manufacturer may impair the protection provided
by the supplied power cord and power supply.