-
23
-
© by DENQBAR GmbH
www.denqbar.com
lifting point
OPERATING TIMES
Before initiating the device please observe the provisions pertaining to corresponding laws (regional
provisions) for the noise control.
NORMAL INTENDED USE
Your DENQBAR compactor is exclusively made for the following mentioned function in respecting the
described safety instructions in this manual:
The compactor has to be used for compacting small or average areas, small basements, terraces,
pavements and gateways.
A normal intended use is compacting:
•
sand
•
gravel
•
slightly cohesive
•
block- or stone pavement
Never start the product in closed rooms or poorly ventilated areas, risk of carbon monoxide poisoning.
The machine may not be used in a potentially explosive environment or be exposed to rain.
The intended usage also includes compliance with the operating, servicing and repair conditions
prescribed by the manufacturer and following the safety instructions included in the instructions.
Any other use is deemed not to be intended use. The manufacturer is not liable for any type of
damage resulting from this: the user bears the sole risk.
Unauthorised modifications on the compactor exclude a liability of the manufacturer for damages of
any kind resulting from it.
Only persons who are familiarised with the device and informed about possible risks are allowed to
prepare, operate and service this device. Repair works may only be carried out by us or by a customer
service agent nominated by us.
SAFETY INSTRUCTIONS
In general
1. Only person who have the following requirements are allowed to lead a machine:
-
the person has to be at full age, 18 years old,
-
physically and mentally fit,
-
instructed in leading compactors,
-
be able to fulfil the given work successfully and reliable
2. Compactors are only allowed for compacting under respect of the operating instructions of the
manufacturer and the safety instructions.
3. The person who are instructed with leading this compactor have to be familiar with the
necessary safety preparations concerning the machine. For exceptional operations the employer
has to give the appropriate additional instructions.