6
7
► Please do not mount the module near heat or damp surfaces.
► Refit is the reversal of the removal process for your specific vehicle,
as per your manufacturer’s instructions.
8. ENABLING
In case of Peugeot enabling certain head unit options is necessary.
This enabling process is done by the Gateway device, the first time
it connects to the car.
If you experience that you cannot reach the new sources on the display,
then please turn the 4th DIP switch of the Gateway ON and start the car.
The moment you started the car, an “Initialization is in progress” message
should appear on the car display.
9. FIRST STEPS
Switch on your car radio and select ‘CD Changer’ mode by pressing the
‘Source’ button on the radio.
Connect your iPod or USB storage to the Gateway. It will start playing
the first song on the device. In case the Gateway was in use earlier, the
music will continue playing from your iPod or USB from where it stopped
previously.
When switching off the radio the playback will stop and the source device
will go on standby.
You can pair the Gateway Pro BT with a Bluetooth capable mobile phone
for music streaming (requires an A2DP capable phone) or hands free (if
that option is active in the Gateway). Pairing is controlled from the mobile
phone, the same way as connecting to other Bluetooth accessories.
The pin code to the Gateway Pro BT is 0000.
Please note:
You have to remove the factory phone module (if available)
to be able to access to the Gateway’s phone option.
Fitting the microphone
The microphone works best when it is kept away from all noise sources
(open windows or speakers) but is located close to the driver: installing it
at the central interior light or the rear view mirror, so to the centre of the
windscreen are two options that can produce high sound quality. There
is also a clip to help you mount the microphone. The optimal place for
the mic depends on several things, so it is recommended to try different
places before finalizing the installation.
7. TESTING AND REFITTING
Before you refit the head unit, test the Gateway Pro BT with your car
audio. Make sure all connections are correct and that you have full
functionality.
Please note:
If during testing you notice any changes or inconsistencies
in the way the car’s electrical system operates, disconnect the Gateway
product immediately and consult your dealer.
When you are done testing everything, refit your head unit.
► Do not trap the cables or leave them in a position where they may
become trapped after refitting the head unit. We supply cable ties
to mount the Gateway Pro BT module.
