Notes:
For successful connection you need to configure your Bluetooth device too! Please consult the
device user guide for information regarding specific functionality.
Some telephones store paired device information for a long time and do not allow a new con-
nection attempt with a stored PIN. To reconnect a previously used device with BTA1000 after 4
different BTA1000 connections, you may need to delete the telephone BTA1000 pairing infor-
mation before re-pairing.
Sony/Ericsson devices generally require pairing to be initiated from the device for a successful
connection.
On some Radios with built in browser capability it is not enough to select the track to activate
the command, but you must definitely press FF, as described above.
Audio
BTA1000 supports A2DP/AVRCP and HSP profiles for audio playback. Due to limitations of these
standards no song information is provided by the Bluetooth device and only Next/Back/Pause/Play
functions are available from the car radio or the steering wheel.
Note, that with certain Bluetooth devices:
Playback remote control may not be available
The media player may have to be started/stopped manually
Navigation prompts from a Bluetooth device
If your device runs navigation software, then select Bluetooth Audio to hear navigation prompts.
During this, you may or may not be able to listen to music from the device’s media player, depending
upon its software characteristics.
Hands Free Calling
To
initiate a call
, first select Bluetooth Hands Free as source device (Disc6/Track6).
To start
Voice Dialing
, simply press Next Track.
To
Redial
the last number press Back Track. Depending upon the implementation on your telephone,
this command will dial the last incoming or outgoing number.
You can
dial directly
on the phone as usual. In this case you do not need to select Bluetooth hands
free on the radio; you can keep going to listen other Gateway source. Bluetooth hands free will be
automatically selected when the connection is established.
Incoming calls
activate the Bluetooth Hands Free source automatically if any other Gateway source
is selected. To
Accept or Reject
the call, use
Next or Previous
Track buttons.
After finishing the call, the Gateway will return to the original Gateway source.
If Radio or CD is selected, than an incoming call mutes the radio periodically allowing you to hear the
telephone ring. By selecting the CD Changer source, Bluetooth Hands Free activates automatically
and Next/Back track will accept or reject the call, as above. After finishing the call, you can switch
back to the Radio manually.
•
•
•
•
•
•
8
