In order to use the iDrive controller for control,
press
the
next track
button
(Pic. 3) on the radio or steering wheel.
Please note:
if you miss that step, you
won’t be able to navigate by iDrive controller.
If you want to get back to the normal iDrive view and use the original controls
again:
- press the previous track button once or
- press the MENU button twice (main menu of the iDrive will appear)
Video functions:
In order to display video contents, you need to
select iPod UI
mode at fi rst on
the iCon Drive because due the iPod touch and iPhone limitation, the video
browsing menu cannot be displayed on the CCC screen. Slide the controller
down and
select
the video
manually
on your
iPod touch
or
iPhone
.
In order to get back to the previous iPod Out playback mode slide the iDrive
controller down.
With iCon drive you can play video from other sources like portable DVD, rear
camera etc.
Slide
and
hold down
the iDrive controller for about
3 seconds
in
order to toggle between external display mode and iPod Out or iPod UI mode.
iCon Drive
iPod, Video, Bluetooth
ICO-9201-1
When the TV as an option has been selected and the iPod touch / iPhone
connected, the unique iPod Out mode main menu will appear on the screen
(Pic. 2) immediately. If the displayed
content doesn’t appear properly
on
the CCC screen, check the settings of the iPod touch or iPhone and make sure
that the
Widescreen option
is
turned OFF
.
(Pic.1)
When the
iPod Out mode
control is
active
(next button was pressed earlier)
the following functions are available through the iDrive controller:
Basic controls
Activate the iCon control
Browsing
Enter / Select
Previous menu
Disable the iCon control
Press next on the radio
Turn left / right the iDrive controller
Push the iDrive button
Slide the controller UP
Press previous or MENU button 2x
During Playback
Next track
Previous track
Fast Forward
Fast Rewind
Slide the controller to the right
Slide the controller to the left
Slide and hold the controller to the right
Slide and hold the controller to the left
Video
Activate iPod UI mode
Deactivate iPod UI
mode
Next track*
Previous track*
Fast Forward
Fast Rewind
Select or deselect
external Video
Slide the iDrive controller down
Slide the iDrive controller down
Slide the controller to the right
Slide the controller to the left
Slide and hold the controller to the right
Slide and hold the controller to the left
Slide and the hold the controller to down
for 3 seconds
* only if you play video from playlist
3. Phone functions
N.B. If the phone option is programmed and activated on the car, then the
iCon drive provides the same functions as the factory phone module. Please
consult the owner’s manual for the correct way of controlling.
Turn ON the Bluetooth option, search for available devices, select iCon Drive
and
enter 0000
for pairing. When a phone is connected then, you can see
the connection status on the CCC and phone screen.
Please note:
A2DP is
not supported.
To enter the phone menu from iCon mode, press the MENU button twice,
select Communication and use your iDrive controller for managing your calls.
If you are listening to Radio or CD then it works as usual like the factory phone
option.
If you have an incoming call and iPod Out mode is active, press previous or
Menu button then you can take up the call with the iDrive controller.
During the phone call, if the iCon mode is active you can alter the microphone
sensitivity between (-20dB & 6dB) by sliding up or down the controller. If
you slide it to the right or left, you can change the speaker volume between
(-20dB & 6dB).
(Pic.2)
User guide for
Audi and BMW
1. Introduction
The iCon Drive from Dension is a vehicle specifi c kit giving you a brand new
user experience. You can play music from the connected iPod touch or iPhone,
and all song related information - including cover art - can be displayed on the
main radio screen.
Video content like podcasts, YouTube videos or downloaded content can be
displayed also from iPod touch or iPhone. iCon Drive has an extra video input
where external DVD player, rear cam or any other video capable device can
be connected.
The iCon Drive also off ers Bluetooth connectivity for handsfree mobile call
handling (A2DP not supported) via the original buttons and screens of your
vehicle.
Supported iPod / iPhone devices
• iPod Touch (2nd , 3rd or 4th generation)
• iPhone, iPhone 3, 3GS, 4 and 4S
Please note:
on iOS 4.x versions the
PAL standard must be selected
manually
each time when iPod touch or iPhone
connected
to the iCon drive.
2. How to control in a BMW
Media functions – iPod Out mode:
Go the Entertainment and select TV from the source options (Pic.1).
(Pic.3)
