Webradio FM
User Manual
v.1.0
IRF-9201-1
1.
I
NTRODUCTION
The Webradio FM
transforms the audio signal to
a standard Stereo FM radio signal and makes
sound available through the car’s radio. This
solution is universal so it is not a problem
anymore if you don’t have a compatible CD-
Changer port or AUX-IN in the Head Unit, you
just need to have a single cigar lighter socket
which is present in all cars. Webradio FM is not a
simple mp3 FM transmitter because it lets you to
stream thousands of different internet radio
stations via 3G capable phone or 3G USB
modem.
This user guide will explain how easy to use the
Webradio FM with USB stick, SD Card or to
listen to a Webradio stream. Please take the time
to read this user guide through carefully and
keep it handy in case of any questions which
arise later on.
Supported Audio devices
USB: Flash Memory (UBS1.1 and higher), SD
Card (SDHC also supported), Micro SD with SD
adapter
File System: FAT16 or FAT32
Storage capacity: up to 64 GB
Music Format:
-
MP3
-
WMA 4 - 44.1 kHz at sample rates up to
320 kb/s. Except for DRM protected files
AUX: 3.5mm stereo aux input
2.
G
ETTING STARTED
Plug the Webradio FM into the cigar lighter
socket and turn it ON, then select FM 88.7 MHz
on the car radio (default frequency of the
Webradio FM) where the Dension demo track will
be audible via the speakers. If the quality is not
good enough, you may need to change the
default FM frequency which is possible in 2
different ways manually or automatically.
Manual selection:
press & hold the ‘SOURCE’
button for 2 seconds till the ‘FM Frequency’
menu appears on the screen. Use the
‘SOURCE’, ‘MENU’, previous (<<) or next (>>)
track buttons on the device for selecting the
proper frequency (between 88.0 – 107.00 MHz)
and press the ‘Play/Pause’ (
►
II) button to
confirm your selection then set the new
frequency on your radio.
Automatic selection
: press & hold the ‘MENU’
button for 3 seconds then wait till the new
frequency value will be visible on the top right
corner of the Webradio display, which takes
maximum 20 seconds. Depending on your car
stereo type you may need to set the new value
manually on the radio.
If the new frequency has been set you are ready
to use the device.
Please note:
For safety reasons turn the device
OFF or pull it out from cigar lighter everytime you
leave your car in order to avoid car’s battery
draining.
3.
H
OW TO CONTROL
The menu of the Webradio FM is displayed on
the device only. The music playback and settings
are controlled from the device. If no device is
connected AUX-IN as a source will be visible and
active.
Please note:
no song selection is
possible in this mode.
USB / SD reader
When you firstly connect the USB stick or SD
card the root directories of the USB stick or SD
card will be displayed. Use the ‘MENU’ (up) and
‘SOURCE’ (down) buttons for browsing and
press play/pause (OK) or next button (>>) to
enter the selected directory or press the previous
(<<) button to return to the previous directory.
During playback press shortly the menu button
and previous track button to get back to the
previous directory. When a song is selected the
id3 tags (only v1) will be displayed on the Radio
screen’s if the radio is Tuner RDS capable.
Please note:
the Webradio FM menu items will
not be displayed on the radio while you are
browsing in the menu.
The Webradio FM saves the playing position
automatically therefore if the USB stick or SD
card has been in use earlier, the music will play
from USB stick or SD card from the point at
which they last played.
Webradio
: Use the same buttons for browsing
and selecting as above.
Accessing the Settings menu
If no device is connected press the ‘MENU’
button. If USB or SD card is the active at first you
need to get back to the root. For example: during
playback press the ‘MENU’ button then press the
previous (<<) until the root directories are visible.
Use the MENU / SOURCE buttons to find the
Settings menu and then press the OK button to
enter.
Settings menu
•
Volume:
use this menu option to
increase or decrease the volume
output of the Webradio FM
•
Source:
you can select the music
source for playback in the Source
menu:
Please note:
only the currently
connected devices can be selected
(e.g. if no USB stick is connected, this
option won’t be accessible) except
AUX-In.
•
3G settings:
In this menu you have 3
submenus: 1.
PIN code
: You need to
use this menu option only if you use
3G USB modem which requires a PIN
security code in order to get connected
to the Internet.
Please note:
only 4
digits can be entered. You need to turn
the PIN security option OFF if the PIN
security code is longer on your 3G
USB modem. 2.
Country
: select the
country of your phone provider. 3.
Provider
: (this option only visible if
Country has been set) In this menu
you can set your provider information
•
About:
Provides information on the
Webradio FM product (HW version,
SW version and RadioTime registration
code)
•
Clear Cache:
This option deletes the
earlier
played
Webradio
station
information
