15
Parameter Setting Flow for Sections 5-2 to 5-5
"Start setting"
Start
Beeps 3 times.
"End setting"
"All defaults" (See NOTE below.)
Beeps 3 times.
End?
End
Y
N
Set communication conditions.
(See p.16 to 18.)
Set transmission format.
(See p.19 to 29.)
Set readable codes.
(See p.30 and 31.)
Set other parameters.
(See p.32 and 33.)
NOTE:
”All Defaults” means that all setting parameters
(such as “Communication parameters”, “Data transmission
format”, “Reading codes” and “Other parameters”) are
changed to default settings.
