10
Notice of Charging
●Charging temperature
・
Charging the battery at room temperature (18°C to 25°C) is recommended in order to deliver optimal performance.
Please note that battery charging stops when ambient temperature drops below 0°C or exceeds 40°C.
●If the power indica
tor of the scanner blinks red, this indicates the circumstances described below.
Please take any appropriate action.
・
A battery is not installed.
Install a battery.
・
Inappropriate contact of electrode
Wipe off dirt around an electrode and charge the battery again.
・
Abnormal temperature of battery is detected.
Charge the battery under an environment at the appropriate temperature (0°C to 40°C).
Avoid peripheral heated objects and direct sunlight.
Unless there is any heated object peripherally, stop charging and replace batteries.
A battery may be heated during the use. In this case, leave the battery for a while and then charge it again.
・
A battery has not yet been fully charged even after the specified charging time.
Recharge it with a spare battery charging slot of CU.
・
Due to battery damage and battery life
Replace a battery with a new one.
・
Due to a battery stored for a long time with very low battery level
Recharge it with a spare battery charging slot of CU.
●Remove the battery from the scanner or the
cradle then store in a cool and dry place if not using the scanner for an
extended period of time.
●When storing a battery for long periods, please consider the followings.
・
Do not store a battery immediately after fully charging.
・
Do not store a depleted (too depleted to turn on the scanner) battery.
Storing a battery for long periods under the above status may deteriorate the performance and life of the battery.
During long-term storage, storing the battery at less than 40% of the power level is recommended.
During long-tern storage, charge the battery fully once a year in order to maintain the battery performance.
When fully charging, allow the battery to discharge down to the recommended level before restoring.
