7
SECTION III - INSTALLATION
INSTALL BACKREST
Operator Stool
1.
Loosen hand knob and insert the backrest bar into
the slot
(FIGURE 6)
.
2. Position the back and tighten the hand knob.
3. Insert the plastic split plug into the hole near the end
of the backrest bar.
ASSEMBLY INSTRUCTIONS (CONTINUED)
Assistant Stool
1.
Remove the hand knob and washer from the bottom
of the seat plate and slide the backrest bar into the
slot
(FIGURE 7)
.
2. Reassemble the hand knob and washer in the same
order as removed.
3. Position back and tighten hand knob.
FIGURE 6. LOOSEN HAND KNOB AND INSERT
BACKREST BAR INTO SLOT
HAND
KNOB
SLOT
BACKREST BAR
SPLIT
PLUG
BACKREST
CONTROL
PLATE
FIGURE 7. REMOVE HAND KNOB AND WASHER
FROM BOTTOM OF CONTROL PLATE AND SLIDE
BACKREST BAR INTO SLOT
CONTROL
PLATE
HAND
KNOB
SLOT
BACKREST BAR
BACKREST