8
GENERATION
TM
STOOLS
866-DTE-INFO
dentalez.com
PN: 2717-221D
SECTION III - INSTALLATION
ASSEMBLY INSTRUCTIONS (CONTINUED)
INSTALL BODY SUPPORT
The gooseneck has a lock collar and adjusting knob,
which may be placed in any one of three positions
(FIGURE 8)
.
1.
Without totally removing the knob from the lock collar
on the gooseneck, loosen the knob until the lock
collar moves freely on the gooseneck. Then position
the lock collar and knob to the desired position and
tighten the knob just enough to hold the lock collar in
place.
INNER
KNOB
POSITION
CENTER
KNOB
POSITION
OUTER
KNOB
POSITION
FIGURE 8. GOOSENECK LOCK COLLAR KNOB
POSITIONS
LOCK
COLLAR
KNOB
2. Install the body support assembly into the
gooseneck with the flat end of the shaft aligned with
the threaded end of the knob
(FIGURE 9)
.
3. Adjust the body support to the desired height and
tighten using the knob.
FIGURE 9. INSTALL BODY SUPPORT ASSEMBLY INTO
GOOSENECK
BODY
SUPPORT
GOOSENECK
KNOB
LOCK
COLLAR
BODY
SUPPORT
RELEASE