10
GENERATION
TM
STOOLS
866-DTE-INFO
dentalez.com
PN: 2717-221D
CLEANING (CONTINUED)
SECTION IV - CARE & MAINTENANCE
3. To remove stains using bleach:
Prepare a solution comprised of one (1) part household bleach (sodium hypochlorite) and nine (9) parts water.
Apply the bleach solution to the stain using a dampened, soft, white cloth.
Allow the bleach solution to puddle on the affected area, or apply a bleach solution-soaked cloth to the area
for approximately 30 minutes.
Using a soft cloth dampened in plain water, rinse the treated area thoroughly to remove any bleach residue.
4. To remove stains using alcohol:
Dampen a soft, white cloth with rubbing alcohol and rub the stain gently.
Using a soft cloth dampened in clean water, rinse the treated area thoroughly to remove any alcohol residue
and pat dry.
5. To restore luster:
Apply a light coat of spray furniture wax containing lemon.
Wait 30 seconds and lightly buff the surface using a clean, white cloth.
ULTRALEATHER
TM
Spot clean with mild soap and water.
Air dry or dry quickly with warm setting of a hair dryer.
For stubborn stains, use mild solvent.
For extremely stubborn stains, an alcohol-based solvent can be used.
Dry cleanable by conventional methods using commercial dry cleaning solvents.
Ultraleather is a trademark of Ultrafabrics, LLC.
PLASTIC AND COATED METAL SURFACES
1.
To remove ordinary dirt:
Prepare a soapy solution comprised of neutral detergent (household dish washing liquid) and water.
Using a soft cloth or sponge, apply this soapy solution to the plastic and coated metal surfaces.
NOTE:
To remove heavier dirt, apply Formula 409
®
or Fantastik
®
Spray Cleaner.
Wipe area dry immediately using a soft cloth.
CAUTION
NEVER
use abrasives or petroleum-based cleaners on any plastic or coated metal surfaces
unless otherwise specified.
DO NO USE
alcohol-based disinfectants on plastic surfaces.
